Categories
Search dan Register/Login
Information

Cellpro 10XP Charger

For Battery types:

  • Lithium Polymer,/li>
  • Lithium Ion,/li>
  • Lithium Manganese,/li>
  • A123 (LiFEPO4),/li>
  • NiCd,/li>
  • NiMH,/li>
  • Pb packs/li>
Supported Cell Counts:
  • LiPo, LiIon, LiMg - 1s-10s balanced, 1s, 2s unbalanced /li>
  • A123 (LiFEPO4) - 1s-10s balanced, up to 12s unbalanced /li>
  • NiCd - up to 28 cells (non-balanced) /li>
  • NiMH - up to 28 cells (non-balanced) /li>
  • Pb (Lead) - up to 24V /li>
Pack capacity: 100mAh to 65Ah (charge time limited to maximum of 12 hours)
Input voltage: 10 to 32VDC; low voltage limit selectable from 10V - 28V in 0.5V increments (Power Management feature)
Input current: Up to 25A; can be limited to 1A to 25A in 0.5A increments (Power Management feature)
Power conversion: 62.5kHz switcher operating at 80% - 95% efficiency
Per-Cell output voltage:
  • LiPo, LiIon, LiMg - 4.10V, 4.20, or 4.22V
  • A123 (LiFEPO4) - 3.65V
  • NiCd - 1.20V /li>
  • NiMH - 1.20V /li>
  • Pb (Lead) - 2V /li>
Output current: 100mA - 15A*, reverse polarity protected
DisCharge current: 1A per cell nominal (42W max) for storage discharging Li
Cont. output current: 234W @ +12V DC input; 645W @ +32V DC input
Cell balancing Resolution: 78uV (16 bit) for 1s-10s Li or A123 LiFEPO4) balanced charging
Voltage calibration: Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV
Current calibration: Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA
Voltage resolution: 78uV (16 bit)
Voltage tolerance: +/- 6mV
Charge current: +/- 1%
Capacity added to pack: +/- 1%
Percent capacity (“Fuel”): +/- 10% (with accurate fuel table defined in preset)
Internal resistance: 0.1mohm voltage resolution allows accurate four point internal resistance measurement of each cell
Serial data output: 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity
Data integrity: Checksum, CRC checking
Cooling fans: Single, 8 CFM, 40mm diameter
Heat sink: Aluminum case, finned
Output battery connector: “Cellpro” compatible, 2 x JST PA series, 6 position
LCD: 2 line, 16 character, light grey/blue backlit
Size: 6.83x3.67x1.70\" 

Perusahaan: Maniak Belanja


tanggal ditambahkan ke database: Sab, 11 Agu 2012

tertarik


PRODUK LAINNYA

Product Image Item Name
Cellpro PowerLab 6 EC5 Charger
For Battery types:Lithium Polymer (1s to 6s balanced, 1s to 2s unbalanced),Lithium Ion (1s to 6s balanced, 1s to 2s unbalanced),/li>Lithium Manganese (1s to 6s...

more detil
Cellpro PowerLab 8 EC5 Charger
For Battery types:Lithium Polymer (1s to 8s balanced, 1s to 2s unbalanced),/li>Lithium Ion (1s to 8s balanced, 1s to 2s unbalanced),/li>Lithium Manganese (1s to 8s...

more detil
13.8v 28a power supply
13.8v 28a power supply ...

more detil
12v 5A Power Supply
12v 5A Power Supply dari Revolectrix ...

more detil
GT POWER Charger
Features:Built-in power supplyMicroprocessor controlledDelta-peak sensitivityIndividual cell balancingLi-ion, LiPo and LiFe capableNi-Cd and NiMH capableLarge range of charge currentsStore function, allows safe storage currentTime limit functionInput...

more detil
Cellpro Multi 4 Charger
For Battery types:Lithium Polymer (1s to 10S balanced),/li>Lithium Ion (1s to 10S balanced),/li>Lithium Manganese (1s to 10S balanced),/li>A123 (LiFePO4) (1s to 10S balanced)/li>Pack capacity: 100...

more detil